Nexus 880 – Vinyl & LVT – 14 kg

Nexus 880 – Vinyl & LVT – 14 kg


In Store Only
Reference: Nexus870-1

 Nexus 870 Vinyl Plank Adhesive – 4L


Nexus 870 is hard setting full cure Adhesive with Low VOC. It is a high performance polymer bend based adhesive designed for the installation of commercial and domestic PVC planks and tiles. It is also suitable for sheet vinyl floorcoverings. It has an excellent plasticizer resistance and is formulated to provide quick initial grab.

Accept Payments

Nexus 880 – High Performance – Vinyl & LVT – 14 kg


Nexus 880 is a high-performance water-based adhesive suitable for installation of dimensional stable PVC flooring – including LVT Tiles, LVP, Linoleum and sanded back sheet rubber flooring up to 4mm thick, it is also suitable for bonding textile floor coverings with all common backings.
The multipurpose High Performance Adhesive has a good all-round balance between open time and work time, it can be used in wet mode for LVP or semi-wet mode for sheet vinyl floor coverings.
For indoor use only.

Spread adhesive with a 1.6mm x 1.6mm x 1.6mm ‘V’ Notched trowel. When installing PVC planks and Tiles lay floorcovering into adhesive without allowing any tack-up time. When installing vinyl sheet products adhesive can be allowed to have a short tack-up time before floorcoverings is lowered. Always check to ensure that complete transfer of adhesive to the floorcovering has occurred. Complete installation according to vinyl manufacturer’s instructions, ensuring the installation is rolled in both directions with the recommended roll weight, prior to the adhesive setting. Do not allow heavy traffic for 24 hours.

Clean up:

Clean tools immediately after use with warm soapy water. Dried adhesive may be softened using a suitable solvent like Nexus 490.

Typical properties:

  • Base Polymer Blend
  • Solids Approx 70%
  • Shelf Life 12 months in sealed container at 20°C
  • Packaging 4 Litre pails


All Products in
Stock in Australia

Locally owned &
operated for 100 years